![]() Now it is important that you have SSH enabled so you can access the Pi remotely as you will lose access to the GUI/Screen. bash /home/pi/start-picture-frame.shĨ. Finally, let’s have it start at boot. #!/bin/bashĭISPLAY=:0.0 XAUTHORITY=/home/pi/.Xauthority /usr/bin/feh -q -p -Z -F -R 60 -Y -D 15.0 /media/NASHDD1/testħ. Now that’s done you can test it by running the following command. To make the file enter the following command: sudo nano /home/pi/start-picture-frame.shĦ. In here, enter the following lines. To fix this, add the & after the command and the script/process will launch in the background.ĥ. So now let’s store this in a simple script file. DISPLAY=:0.0 XAUTHORITY=/home/pi/.Xauthority /usr/bin/feh -q -p -Z -F -R 60 -Y -D 15.0 /media/NASHDD1/testĤ. Now as you will notice this locks up the command line bar. You can read more about all the flags you can use over at the feh manual page. ![]() DISPLAY=:0.0 XAUTHORITY=/home/pi/.Xauthority /usr/bin/feh -quiet -preload -randomize -full-screen -reload 60 -Y -slideshow-delay 15.0 /media/NASHDD1/testģ. Now we can use short tags to make this command a lot shorter. Replace /media/NASHDD1/test with the directory that contains all your image (/home/pi/Pictures). :~ $ sudo -iĬommand line tool, feh, can show different size photos to your LCD.ġ. To install the package, use the following line: sudo apt-get install fehĢ. Now to test that it works enter the following line. Now, we are getting to the step to install actual program to do slideshow your pictures. Look for the Screen Blanking row, click Disable. In Raspberry Pi Configuration Window, click on Display Tab. Uncomment last line will allow apt update to get source list.ĭeb-src stretch main contrib non-free rpiĬlick on the Menu button on the upper right (Raspberry Pi Icon) > Preferences > Raspberry Pi Configuration. This text defines which repository the package manager will connect to when updating. #deb-src stretch main contrib non-free rpi # Uncomment line below then 'apt-get update' to enable 'apt-get source' sudo nano /etc/apt/sources.listĢ. Within this file, you will see the following text. You can restart by using the command "sudo reboot" in the terminal.īy default, there is no valid source to get update.ġ.Let’s begin modifying this file by running the following command on the Raspberry Pi. You can remove this LXPanel plugin by using the following command on your device.ĥ. For this change to take effect, you will need to restart your Raspberry Pi. This plugin is responsible for showing the notification you may see in the top-right corner of your screen. Please note this means you will no longer receive any more warnings about your Pi not receiving enough voltage.ģ. Once you have added this line, save the file by pressing CTRL + X, then Y, followed by the ENTER key.Ĥ. We also need to remove the “battery monitor” plugin. By setting this value to 1, we are telling it to disable all warning overlays. ![]() This config file is available on the boot partition when you plug the SD Card on your Raspberry Pi.Ģ. Within this file, you will need to add the following line to the bottom of the file. You can begin modifying this file by running the following command on your device. To disable the low voltage warning, we will need to modify the boot config file. This notification can be disabled using following configuration steps. ![]() I am using a general USB adapter (5V 2A) to provide power which does not have enough (5V, 2.5A) and it will cause a notification to warm low voltage. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |